IEC 60332-1-3《着火条件下的电力和光纤电缆试验 - 第 1-3 部分：单根绝缘电线或电缆的垂直火焰传播试验》

	更新时间 2025-01-07 20:00:00 价格请来电询价测试周期 5-7天寄样地址深圳宝安价格费用电话详谈联系电话 17324413130 联系手机 17324413130 联系人罗卓文立即询价

详细介绍

标准编号 Standard/Code	标准名称 Standard Title
IEC 60332-1-3	Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

IEC 60332-1-3 Specifies a test procedure for assessment of falling flaming droplets/ particles when a single vertical electrical insulated conductor or cable, or optical fibre cable, is subjected to defined fire conditions. NOTE - Testing to IEC 60332-1-3 may be performed simultaneously with that to IEC 60332-1-2, if required. Recommended requirements for performance are given in Annex A. IEC 60332-1-3 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm2 total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed.

IEC 60332-1-3 规定了当单个垂直电绝缘导体或电缆或光纤电缆受到规定的火灾条件时评估下落的燃烧液滴/颗粒的测试程序。注：如果需要，IEC 60332-1-3 测试可以与 IEC 60332-1-2 测试同时进行。推荐的性能要求在附录 A 中给出。IEC 60332-1-3 规定使用 1 kW 预混合火焰，适用于一般用途，但规定的程序可能不适用于小型单绝缘导体的测试或总横截面积小于 0.5 mm2 的电缆，因为导体在测试完成前熔化，或用于测试小型光纤电缆，因为电缆在测试完成前断裂。

Test Requirement 测试要求：

Sample Size 样品数量 / 送样规格: 5m
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 9 working days

Report Summary 报告摘要:

相关产品