欧盟CE认证标准EN 12209《建筑硬件。机械操作的锁和锁定板。要求及测试方法》

This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: a) for use in doors in buildings; b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and c) for use on locked fire doors to maintain the fire integrity of the door assembly. This European standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades. This European standard does not specify Multipoint locks or their locking plates which are specified by prEN 15685. This European Standard specifies the dimensions and properties required for security Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies is beyond the scope of this European Standard.

Test Item 测试名称: BS EN 12209 Building hardware. Mechanically operated locks and locking plates. Requirements and test methods 建筑五金-锁具要求和测试方法

Test Requirements 测试要求：

5.1 General
5.1.1 Dangerous substances
5.1.2 Return force of latch bolt
5.2 Category of use
5.2.1 Resistance to side load on latch bolt
5.2.2 Torque to operate deadbolt
5.2.3 Strength of normal latch action and stops
5.2.4 Torque resistance of rim lock with lockable handle/knob
5.3 Durability
5.3.1 Durability of latch action
5.3.2 Durability of deadbolt mechanism
5.3.3 Durability of locking snib mechanism
5.4 Door mass and closing force
5.5 Suitability for use on fire/smoke doors
5.7 Corrosion resistance and temperature
5.8 Security
5.8.1 Torque resistance of knob
5.8.2 Resistance to side load
5.8.3 Deadbolt projection
5.8.4 Resistance to end load on deadbolt
5.8.5 Resistance to pulling of hook/claw bolt
5.8.6 Resistance to disengaging of hook/claw bolt
5.8.7 Resistance to forcing of locating device in sliding door locks
5.8.8 Resistance to pullinf off of knob on bored lock and latch set
5.8.9 Resistance to security reguirements for the locking plate
5.10 Key operation and locking
5.10.1 Strength of key 钥匙强度
5.10.2 Deadlocking
5.10.3 Torque to withdraw the latch bolt with key
5.11 Spinder operation
5.11.1 Torque to withdraw the latch bolt with handle
5.11.2 Strength of bolt actions
5.11.3 Minimum follower restoring torque
5.12 Key identification requirement
5.12.1 Detaining elements
5.12.2 Effective differs
5.12.3 Differing step heights on key
5.12.4 Non-interpassing of keys with just one interval differ
5.12.5 Coding protection
7 Marking

编码保护
拨动件回复扭矩Zui小值
拨动件缩回斜舌扭矩
操作呆舌扭矩
从门上防拆卸保护
呆舌侧向载荷
呆舌端部载荷
呆舌机构耐用度
呆舌伸出长度
带锁闭执手/执手球的外装门锁抗扭矩
带中间锁闭位置的手动锁闭
防钻和呆舌侧向载荷
防钻和呆舌端部载荷
钩/爪舌抗拉力
钩/爪舌抗脱力
关门力
极端温度操作
仅一级牙花不同的钥匙间无互开
耐腐蚀
球形锁和碰锁装置执手球防拉脱
球形锁和碰锁装置执手球或弯形执手抗扭矩
手动锁闭
锁扣板侧向载荷
锁扣板抗拉力
锁扣板抗提力
锁扣盒端部载荷
锁舌机构强度
外装门锁执手球或弯形执手抗扭矩
斜舌侧向载荷
斜舌回复力
斜舌机构耐用度
旋钮锁闭机构耐用度
移门锁定位装置抗外力
有效不同数
钥匙不同台阶高度数
钥匙强度
钥匙缩回斜舌扭矩
正常斜舌机构和制动部件强度
止动元件
自动锁闭呆舌
自动锁闭斜舌

Sample Size 样品数量 / 送样规格: 26pcs
Lead Time / TAT (Turn Around Time) 测试周期: 常规服务 Regular service 15 working days

Report Summary 报告摘要: