手套手掌处振动CE测试认证- EN ISO 10819:2013详解-PPE

1、机械振动和冲击欧盟CE认证标准

EN ISO 10819:2013

Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand机械振动和冲击.手臂振动.手套手掌处振动传递率的测量和评估

2、机械振动和冲击欧盟CE认证法规

PPE个人防护法规：PPE Regulation (EU) 2016/425

3、EN ISO 10819:2013 适用CE认证范围

This International Standard specifies a method for the laboratory measurement, data analysis, and reporting of the vibration transmissibility of a glove with a vibration-reducing material that covers the palm, fingers, and thumb of the hand. This International Standard specifies vibration transmissibility in terms of vibration transmitted from a handle through a glove to the palm of the hand in one-third- octave frequency bands with center frequencies of 25 Hz to 1 250 Hz. The measurement procedure specified in this International Standard can also be used to measure the vibration transmissibility of a material that is being evaluated for use to cover a handle of a machine or for potential use in a glove. However, results from this test cannot be used to certify that a material used to cover a handle meets the requirements of this International Standard to be classified as an antivibration covering. A material tested in this manner could later be placed in a glove. When this is the case, the glove needs to be tested in accordance with the measurement procedure of this International Standard and needs to meet the vibration attenuation performance requirements of this International Standard in order to be classified as an antivibration glove. 本规定了一种实验室测量、数据分析和报告手套振动传递率的方法，该手套采用覆盖手掌、手指和拇指的减振材料。本规定了振动传递性，即在中心频率为25 Hz至1250 Hz的三分之一倍频程频带内，通过手套从把手传递到手掌的振动。本中规定的测量程序也可用于测量被评估用于覆盖机器手柄或可能用于手套的材料的振动传递率。然而，本试验的结果不能用来证明用于覆盖把手的材料符合本的要求，被归类为防振覆盖层。以这种方式测试的材料稍后可以放在手套中。在这种情况下，手套需要按照本的测量程序进行测试，并且需要满足本的振动衰减性能要求，才能被归类为防振手套。

4、机械振动和冲击欧盟CE认证测试项目

5、机械振动和冲击CE认证怎么做

1）I类PPE机械振动和冲击认证要求： Category I

工厂自控+欧标测试报告+DOC自我声明

2）II类PPE机械振动和冲击认证要求：Category II

认证模式B+C：需要由对应机械振动和冲击资质的欧盟公告号机构进行型式测试，以及技术资料的审核，包含说明书，包装，CE标签，DOC自我声明等，审核通过后工厂获得B证书；

同时除了保证工厂批次生产的个人防护机械振动和冲击都能满足CE的要求，工厂还需要进行C模式-生产控制。

3）III类PPE机械振动和冲击认证要求：Category III

认证模式B+C2或者B+D

需要由对应机械振动和冲击资质的欧盟公告号机构进行型式测试，以及技术资料的审核，包含说明书，包装，CE标签，DOC自我声明等，审核通过后工厂获得B证书；

同时每年工厂需要按照NB机构的要求进行年审，模式可以选择C2抽样测试，或者D验厂的模式，获得C2证书或者D证书。

只有B+C2和B+D全部完成才是一个完整的CE认证。

详见: PPE认证是什么？如何申请？

了解更多：

PPE个人防护产品CE认证

CE认证是什么认证？