ISO 4210 标准城市自行车测试

	更新时间 2024-05-16 20:00:00 价格请来电询价测试周期 5-7天寄样地址深圳宝安价格费用电话详谈联系电话 17324413130 联系手机 17324413130 联系人罗卓文立即询价

详细介绍

Test item 测试名称: 城市自行车 City and trekking bicycles

Norm refer: EN 14764

Test info 测试内容：

4.2	Sharp edges 利边
4.3	Security and strength of safety-related fasteners 安全紧固件强度测试
4.4	Crack detection methods 裂缝探测方法
4.5	Protrusions 突出物
4.6	Brakes 刹车
4.7	Steering 操纵系统
4.7.1	Handlebar - Dimensions尺寸
4.7.2	Handlebar grips and plugs 车把手握把和插销
4.7.3	Handlebar stem -insertion-depth mark or positive stop车把手立管插入深度标记
4.7.4	Handlebar stem -extension to fork-stem-clamping re车把手立管延伸处装夹要求
4.7.5	Steering stability 操纵稳定性
4.7.6	Steering assembly-Static strength and security tests 静态强度及牢固性
4.7.7	Handlebar and stem assembly - Fatigue test 把手及立管疲勞
4.8	Frame 车架
4.8.1	Suspension frame - Special re 特殊要求
4.8.2	Impact test (Falling mass) 冲击测试
4.8.3	Frame-Fatigue test with pedalling forces 车架动态摇摆
4.8.4	Frame-Fatigue test with a vertical force 垂直力疲劳
4.9	Front fork 前叉
4.9.1	General 一般要求
4.9.2	Means of location of the axle 前叉轴之要求
4.9.3	Suspension fork - Special re 特殊要求
4.9.4	Front fork - Static bending test 静态弯曲测试
4.9.5	Front fork - Rearward impact test 向后冲击测试
4.9.6	Front fork - Bending fatigue test 弯曲疲劳测试
4.9.7	Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞車之前叉
4.1	Wheels and Wheel/tyre assembly轮子
4.10.1	Rotational accuracy 真圆度
4.10.2	Wheel/tyre assembly - Clearance 轮子间隙
4.10.3	Wheels - Static strength test 轮子静态强度测试
4.10.4	Wheels - Wheel retention 轮子保持力测试
4.10.5	Wheels - Quick release mechanisms 快卸机构
4.11	Rims , Tyres and tubes 轮缘, 轮胎
4.12	Mudguards 挡泥板
4.13	Pedals and pedal/crank drive system 踏板和曲柄
4.13.1	Pedal tread 踏板面
4.13.2	Pedal clearance 踏板间隙
4.13.3	Pedal/pedal spindle assembly - Static strength test 踏板/踏板轴组件 - 静态强度
4.13.4	Pedal spindle - Impact test 踏板轴冲击
4.13.5	Pedal/pedal spindle - Dynamic durability test 踏板/踏板轴组件 -动态疲劳测试
4.13.6	Drive system - Static strenght test 传动系统强度
4.13.7	Crank assembly - Fatigue test 曲柄组疲劳测试
4.14	Saddles and seat-pillars 座垫和座垫轴
4.14.1	General 一般要求
4.14.2	Limiting dimensions 尺寸
4.14.3	Seat pillar insertion mark 座垫轴插入深度记号
4.14.4	Saddle/seat pillar - Security test 座垫和座垫轴强度
4.14.5	Saddle - Static strength test 座垫轴静态强度
4.14.6	Saddle and seat-pillar clamp-Fatigue test座垫及座杆疲劳测试
4.14.7	Seat pillar - Fatigue test 座垫轴疲劳测试
4.15	Drive-chain 传动链条
4.16	Chainguard 链条盖
4.17	Spoke connector 轮辐连接器
4.18	Luggage carriers 行李架
4.19	Handling and operation of a fully-assembled bicycle 路况测试
4.2	Lighting systems and reflectors照明系统及反射镜
4.21	Warning device报警装置
5	Instructions 说明书
6	Marking 标签
Informative items
Annex B	Steering geometry 掌舵部分几何图
Annex C	Structural intergrity of the fully assemblyed bicycle整车综合强度测试
Annex D	Wheel/tyre assembly - Fatigue test 轮子轮胎疲劳测试