欧盟电动自行车标准EN 15194
![]() ![]() ![]() ![]() | 更新时间 2024-09-06 20:00:00 价格 请来电询价 测试周期 5-7天 寄样地址 深圳宝安 价格费用 电话详谈 联系电话 17324413130 联系手机 17324413130 联系人 罗卓文 立即询价 |
详细介绍
EN 15194 <span class="font6" font-size:10px;font-family:Arial;">电动自行车
This European Standard applies to EPAC for private and commercial use with exception of EPAC intended for hire from unattended station.
This European Standard is intended to cover all common significant hazards, hazardous situations and events (see Clause 4) of electrically power assisted bicycles, when used as intended and under condition of misuse that are reasonably foreseeable by the manufacturer.
This European Standard is intended to cover electrically power assisted bicycles of a type which have a maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.
This European Standard specifies requirements and test methods for engine power management systems, electrical circuits including the charging system for the assessment of the design and assembly of electrically power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V d.c. or integrated battery charger with a 230 V a.c. input.
This European Standard specifies safety and performance requirements for the design, assembly, and testing of EPAC bicycles and subassemblies intended for use on public roads, and lays down guidelines for instructions on the use and care of such bicycles.
This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or more and that are intended for use on public roads.Safety requirements and/or protective measures 安全要求与/或保护措施General (ISO 12100) 一般要求Electrical requirements 电气要求Electric circuit 电路Controls and symbols 控制与标志Batteries 电池Battery charger 电池充电器integrated battery charger (LVD)external battery charger (LVD CERTIFICATE REVIEW)Electric cables and connections 电线和联结Wiring 布线Power cables and conduits 电源线和导电管External and internal electrical connections 内部和外部连接Moisture resistance 防潮测试Mechanical strength test 机械强度Maximum speed for which the electric motor gives assistance 辅助动力Zui大速度Start-up assistance mode 起动辅助模式Power management 功率管理Maximum power measurementElectro magnetic compatibility 电磁兼容Emission 电磁干扰Immunity 抗干扰能力Battery charger 电池充电器Failure mode 失效模式Anti-tampering measure 防篡改措施Mechanical requirementsSharp edges 锐边Security and strength of safety-related fasteners 与安全有关的紧固件的可靠性Protrusions 突出物Brakes 车闸Braking-systems 制动系统Hand-operated brakes 手闸Attachment of brake assembly and cable requirements 车闸部件的安装和Brake-levers Position of applied force 闸把施力部位Brake-block and brake-pad assemblies-security test 闸皮和闸盒组合件-强度测试Brake adjustment 车闸的调整Hand-operated braking system- strength test 手闸制动系统-强度测试Back-pedal braking system- strength test 脚闸制动系统-强度测试Braking performance 制动性能Brakes-heat-resistance test 车闸-耐热测试Back-pedal brake linearity test 脚闸线性测试Steering 车把Handlebar - Dimensions 把横管-尺寸Handlebar grips and plugs 把横管的把套和把盖Handlebar stem -insertion-depth mark or positive stop 把立管-插入深度标记或有效档块Handlebar stem to fork steerer-clamping requirements 把立管对前叉立管-夹紧要求Steering stability 车把稳定性Steering assembly-Static strength and security tests车把部件-静负荷强度和可靠性测试Handlebar stem/Handlebar and stem assembly-lateral bending tests 把立管Handlebar-stem-forward bending test 把立管-向前弯曲测试Handlebar to handlebar-stem-torsional security test 把横管对把立管-扭矩安全测试Handlebar-stem to fork-stem-torsional security testBar-end to handlebar-torsional security test 把端把对把横管-扭矩安全测试Handlebar and stem assembly - Fatigue test 把横管和把立管组合件 - 疲劳测试Frame 车架Suspension frame - Special requirements 避震车架-特殊要求Frame — Impact test (falling mass) 车架-冲击测试(落重)Frame and front fork assembly — Impact test (falling frame)Frame-Fatigue test with pedalling forces 车架-脚蹬力疲劳测试Frame-Fatigue test with a Horizontal force 车架水平力疲劳测试Frame-Fatigue test with a vertical force 车架垂直力疲劳测试Front fork 前叉Means of location of the axle and wheel retention 前轴和前轮的夹紧定位方式Suspension fork - Special requirements 避震前叉-特殊要求Tyre clearance test 轮胎间隙Tensile test 拉伸测试Front fork - Static bending test 前叉-静弯曲测试Front fork - Rearward impact test 前叉-向后冲击测试Forks made entirely of metal 全金属前叉Forks which have composite parts 带合成材料前叉Front fork - Bending fatigue test plus rearward impact testForks intended for use with hub - or disc brakes 用于轮毂闸或盘闸的专用前叉Tensile test for a non-welded fork 非焊接前叉拉伸强度Wheels and Wheel/tyre assembly 车轮和车轮/轮胎组合件Wheel/tyre assembly-concentricity and lateral tolerance 车轮/轮胎组合件-径向轴向圆跳动公差Wheel/tyre assembly - Clearance 车轮/轮胎组合件-间隙Wheels - Static strength test 车轮-静负荷测试Wheels - Wheel retention 车轮-车轮的夹持Wheels - Quick release mechanisms 车轮-快卸机构Rims , Tyres and tubes 轮辋、外胎和内胎Tyre inflation pressure 轮胎充气气压Tyre and rim compatibility (ISO 5775-1/2) 轮胎和轮毂匹配度Rim-wear 轮毂磨损Greenhouse effect test for composite wheels 复合材料温室效应Front Mudguards 前挡泥板Pedals and pedal/crank drive system 脚蹬和脚蹬/曲柄驱动系统Pedal tread 脚蹬脚踩面Pedal clearance 脚蹬间隙Pedal/pedal spindle assembly - Static strength test 脚蹬和脚蹬轴组合件-静符合测试Pedal spindle - Impact test 脚蹬轴-冲击测试Pedal- Dynamic durability test 脚蹬-动态耐久性测试Drive system - Static strenght test 驱动系统-静负荷测试Crank assembly - Fatigue test 曲柄组合件疲劳测试Drive-chain and drive belt 传动链与传动带Drive-chain 传动链Drive belt 传动皮带Chain-wheel and belt-drive protective device 链轮与皮带轮保护装置Chain-wheel disc and drive pulley disc diameter 链轮盘与驱动盘直径Chain and drive belt protective device 链轮盘保护装置Combined front gear-change guide 整合式前轮拨Saddles and seat-pillars 鞍座和鞍管Limiting dimensions 限制尺寸Seat-post — Insertion-depth mark or positive stop 鞍管-插入深度标记或有效档块Saddle/seat-post — Security test 鞍座/鞍管-安全性测试Saddle — Static strength test 鞍座-静负荷测试Saddle and seat-pillar clamp-Fatigue test 鞍座和鞍座夹紧装置 - 疲劳测试Saddle and seat-post clamp — Fatigue test 鞍管疲劳测试Spoke connector 辐条保护盘Luggage carriers 衣架Road test of a fully assembled bicycle 完整自行车路况测试Lighting systems and reflectorsWiring harnessLighting systems (ISO 6742‑1)Reflectors (ISO 6742‑2)Warning device 鸣号装置Thermal hazards 热危害Performance Levels (PLr) for control system of EPACs (ISO 13849)List of significant hazards and performance levels 重大危害列表与性能水平Significant hazards 重大危害Marking and labelling 标签Instructions for use 使用说明书
This European Standard applies to EPAC for private and commercial use with exception of EPAC intended for hire from unattended station.
This European Standard is intended to cover all common significant hazards, hazardous situations and events (see Clause 4) of electrically power assisted bicycles, when used as intended and under condition of misuse that are reasonably foreseeable by the manufacturer.
This European Standard is intended to cover electrically power assisted bicycles of a type which have a maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.
This European Standard specifies requirements and test methods for engine power management systems, electrical circuits including the charging system for the assessment of the design and assembly of electrically power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V d.c. or integrated battery charger with a 230 V a.c. input.
This European Standard specifies safety and performance requirements for the design, assembly, and testing of EPAC bicycles and subassemblies intended for use on public roads, and lays down guidelines for instructions on the use and care of such bicycles.
This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or more and that are intended for use on public roads.Safety requirements and/or protective measures 安全要求与/或保护措施General (ISO 12100) 一般要求Electrical requirements 电气要求Electric circuit 电路Controls and symbols 控制与标志Batteries 电池Battery charger 电池充电器integrated battery charger (LVD)external battery charger (LVD CERTIFICATE REVIEW)Electric cables and connections 电线和联结Wiring 布线Power cables and conduits 电源线和导电管External and internal electrical connections 内部和外部连接Moisture resistance 防潮测试Mechanical strength test 机械强度Maximum speed for which the electric motor gives assistance 辅助动力Zui大速度Start-up assistance mode 起动辅助模式Power management 功率管理Maximum power measurementElectro magnetic compatibility 电磁兼容Emission 电磁干扰Immunity 抗干扰能力Battery charger 电池充电器Failure mode 失效模式Anti-tampering measure 防篡改措施Mechanical requirementsSharp edges 锐边Security and strength of safety-related fasteners 与安全有关的紧固件的可靠性Protrusions 突出物Brakes 车闸Braking-systems 制动系统Hand-operated brakes 手闸Attachment of brake assembly and cable requirements 车闸部件的安装和Brake-levers Position of applied force 闸把施力部位Brake-block and brake-pad assemblies-security test 闸皮和闸盒组合件-强度测试Brake adjustment 车闸的调整Hand-operated braking system- strength test 手闸制动系统-强度测试Back-pedal braking system- strength test 脚闸制动系统-强度测试Braking performance 制动性能Brakes-heat-resistance test 车闸-耐热测试Back-pedal brake linearity test 脚闸线性测试Steering 车把Handlebar - Dimensions 把横管-尺寸Handlebar grips and plugs 把横管的把套和把盖Handlebar stem -insertion-depth mark or positive stop 把立管-插入深度标记或有效档块Handlebar stem to fork steerer-clamping requirements 把立管对前叉立管-夹紧要求Steering stability 车把稳定性Steering assembly-Static strength and security tests车把部件-静负荷强度和可靠性测试Handlebar stem/Handlebar and stem assembly-lateral bending tests 把立管Handlebar-stem-forward bending test 把立管-向前弯曲测试Handlebar to handlebar-stem-torsional security test 把横管对把立管-扭矩安全测试Handlebar-stem to fork-stem-torsional security testBar-end to handlebar-torsional security test 把端把对把横管-扭矩安全测试Handlebar and stem assembly - Fatigue test 把横管和把立管组合件 - 疲劳测试Frame 车架Suspension frame - Special requirements 避震车架-特殊要求Frame — Impact test (falling mass) 车架-冲击测试(落重)Frame and front fork assembly — Impact test (falling frame)Frame-Fatigue test with pedalling forces 车架-脚蹬力疲劳测试Frame-Fatigue test with a Horizontal force 车架水平力疲劳测试Frame-Fatigue test with a vertical force 车架垂直力疲劳测试Front fork 前叉Means of location of the axle and wheel retention 前轴和前轮的夹紧定位方式Suspension fork - Special requirements 避震前叉-特殊要求Tyre clearance test 轮胎间隙Tensile test 拉伸测试Front fork - Static bending test 前叉-静弯曲测试Front fork - Rearward impact test 前叉-向后冲击测试Forks made entirely of metal 全金属前叉Forks which have composite parts 带合成材料前叉Front fork - Bending fatigue test plus rearward impact testForks intended for use with hub - or disc brakes 用于轮毂闸或盘闸的专用前叉Tensile test for a non-welded fork 非焊接前叉拉伸强度Wheels and Wheel/tyre assembly 车轮和车轮/轮胎组合件Wheel/tyre assembly-concentricity and lateral tolerance 车轮/轮胎组合件-径向轴向圆跳动公差Wheel/tyre assembly - Clearance 车轮/轮胎组合件-间隙Wheels - Static strength test 车轮-静负荷测试Wheels - Wheel retention 车轮-车轮的夹持Wheels - Quick release mechanisms 车轮-快卸机构Rims , Tyres and tubes 轮辋、外胎和内胎Tyre inflation pressure 轮胎充气气压Tyre and rim compatibility (ISO 5775-1/2) 轮胎和轮毂匹配度Rim-wear 轮毂磨损Greenhouse effect test for composite wheels 复合材料温室效应Front Mudguards 前挡泥板Pedals and pedal/crank drive system 脚蹬和脚蹬/曲柄驱动系统Pedal tread 脚蹬脚踩面Pedal clearance 脚蹬间隙Pedal/pedal spindle assembly - Static strength test 脚蹬和脚蹬轴组合件-静符合测试Pedal spindle - Impact test 脚蹬轴-冲击测试Pedal- Dynamic durability test 脚蹬-动态耐久性测试Drive system - Static strenght test 驱动系统-静负荷测试Crank assembly - Fatigue test 曲柄组合件疲劳测试Drive-chain and drive belt 传动链与传动带Drive-chain 传动链Drive belt 传动皮带Chain-wheel and belt-drive protective device 链轮与皮带轮保护装置Chain-wheel disc and drive pulley disc diameter 链轮盘与驱动盘直径Chain and drive belt protective device 链轮盘保护装置Combined front gear-change guide 整合式前轮拨Saddles and seat-pillars 鞍座和鞍管Limiting dimensions 限制尺寸Seat-post — Insertion-depth mark or positive stop 鞍管-插入深度标记或有效档块Saddle/seat-post — Security test 鞍座/鞍管-安全性测试Saddle — Static strength test 鞍座-静负荷测试Saddle and seat-pillar clamp-Fatigue test 鞍座和鞍座夹紧装置 - 疲劳测试Saddle and seat-post clamp — Fatigue test 鞍管疲劳测试Spoke connector 辐条保护盘Luggage carriers 衣架Road test of a fully assembled bicycle 完整自行车路况测试Lighting systems and reflectorsWiring harnessLighting systems (ISO 6742‑1)Reflectors (ISO 6742‑2)Warning device 鸣号装置Thermal hazards 热危害Performance Levels (PLr) for control system of EPACs (ISO 13849)List of significant hazards and performance levels 重大危害列表与性能水平Significant hazards 重大危害Marking and labelling 标签Instructions for use 使用说明书
Turnaround time: normal(30 working days)
工作天: 普通件(30个工作天)
Informaiton required for apply testing 测试必须信息
1. 整车测试:各紧固件的锁紧扭力
零部件测试:
车闸:自行车类型,各紧固件的锁紧扭力
车把:自行车类型,车把横管和立管的锁紧扭力
车架:自行车类型,车架头管下端到轮轴距离,车轮尺寸
前叉:自行车类型,前叉使用在多大的车轮直径上(24”, 26”, 650B, 29”or700c,针对条款
车轮转动精度:自行车类型,车闸类型(Intended for rim-brakes, Not intended for rim-brakes)
脚踏:自行车类型
鞍座鞍管:自行车类型,鞍座锁紧扭力 产品标签,说明书
2. 关于反射器的测试ISO 6742‑2,客服同事须在进单前确认以下操作,三种情况其中一种,并在申请表中注明
a.申请测试;
b.提供报告:报告须有结论,报告型号与实际反射器型号一致,有效期1年;
c.此项目NT
相关产品
联系方式
- 电 话:17324413130
- 检测工程师:罗卓文
- 手 机:17324413130