塑料水槽的美国国家标准ANSI Z 124.6测试

	更新时间 2024-12-18 20:00:00 价格请来电询价测试周期 5-7天寄样地址深圳宝安价格费用电话详谈联系电话 17324413130 联系手机 17324413130 联系人罗卓文立即询价

详细介绍


Test item 测试名称：
American National Standard For Plastic Sinks 塑料水槽的美国国家标准

Test info 测试内容：
Clause	Test Requirement
2	General requirement 普通要求
2.2	Dimensions and tolerances 尺寸以及偏差
2.4	Installation,care, and maintenance instructions 安装，注意以及保养说明
2.5	Identification 鉴别
3	Workmanship and finish 工艺以及外观检查
4	Structural integrity of complete units 全套样品的结构完整性
4.1	Drain fitting connection 排水连接件试验（all sinks)
4.2	Impact tests 冲击试验
4.2.1	Point impact 点冲击试验（all sinks)
4.2.2	Knife drop test 小刀跌落试验（kitchen and bar sinks only)
4.2.3	Skillet drop test 煮锅跌落试验 (kitchen sinks only)
4.3	Load test 负荷试验
4.4	Vibration test 振动试验 (be performed only on sink compartments with an outlet of 89mm diameter or greater.)
5	Physical characteristics of material 材料的物理性状
	Colorfastness and aging test 不退色以及抗老化试验 (kitchen and bar sinks only) (specific condition)
5.2	Stain resistance test 抗污染试验 (all sinks)
5.3	Wear and cleanability test 磨损及清洁能力试验 (all sinks)
5.4	Cigarette test 香烟试验 (all sinks)
5.5	Chemical resistance test 抗化学试验 (all sinks)
5.6	Heated pan test 加热平底盘试验 (kitchen sinks only）
5.7	Hot wax test 热腊试验 (kitchen sinks only)
6	Additional material tests 附加的材料检查
6.1	Thermal shock resistance test 抗热冲击试验 (kitchen, laundry and service sinks only)
6.2	Thermal shock resistance test 抗热冲击试验 (bar sinks only)
Sampling requirement: 3 sets of completed samples with assembly instruction (if applicable), Another samples should be supplied. As follow:
3 pcs of approximately 95mm95mm & 2 pcs of approximately 150mm150mm
the flat specimen material made from the same materials as the units; 3 pcs of samples with size 4” X 15”
样品要求：全套样品3套并包含安装说明书（如适用），需要另外提供下面的样品：3片尺寸约为95mm95mm & 2片尺寸约为150mm150mm的平面样品，样品的材料要与产品材料相同。3片4"X15"的样品
Turnaround time: normal (23 working days)
所需时间：标准（23个工作日）