加拿大标准 SOR/2010-261 摇篮及摇床的安全测试
SOR/2010-261 Cribs, Cradles and Bassinets Regulations, 童床,摇篮及摇床的安全测试 | |
Clause | Test Requirement |
physical part 物理机械部分 | |
Surface Coating (CCPSA Soluble Sb, As, Cd, Ba, Se), 表面涂层测试 ( CCPSA 溶出锑、砷、镉、钡、硒) | |
Surface Coating (CCPSA Total Pb, Total Hg), 表面涂层测试 ( CCPSA 总铅总汞含量) | |
Flammability (CAN/CGSB-4.2, No. 27.5-2008) | |
INFORMATION AND ADVERTISING | |
3 | GENERAL PROVISIONS |
5 | PRESENTATION OF INFORMATION |
8 | CRIBS, CRADLES AND BASSINETS |
10 | CRIBS |
11 | CRADLES |
12 | BASSINETS |
13 | GENERAL PROVISIONS-shearing or pinching |
14 | surface coating |
15 | requirement on rock angle |
16 | STRENGTH AND SOLIDITY OF SLATS |
17 | bound opening |
18 | Flammability |
19 | test on mesh |
20 | requirement on mattress |
21 | entanglement hazard |
22 | sharp point and sharp edge |
23 | small part |
24 | coil spring |
25 | requirement on the openings |
cribs(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is greater than 5 500 cm2.) | |
26 | requirement of the height |
29 1) | locking system for the movable side |
2) | force requirement |
3) | requirement of move-upward side of a crib |
4) | latching or locking mechanism of every rotating side of a crib |
5) | |
30 | latch and structural integraty requirement for folding cot |
31 | requirement of post |
32 | requirement of toe hold |
33 | TEST OF MATTRESS SUPPORT |
34 | structural integrity |
cradles(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is greater than 4 000 cm2 but less than or equal to 5 500 cm2.) | |
35 | height requirement |
36 | |
37 | requirement of locking system |
38 | structural integrity |
39 | TEST OF MATTRESS SUPPORT |
40 | strenght of the locking system(depends on clause 38) |
bassinets(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is less than or equal to 4 000 cm2.) | |
41 | height requirement |
42 | static load |
Remark: | |
Sample required: 2 sets of completed products with assembly instruction (if applicable) is recommended. 1 more set required for toxicity test. | |
样品要求: 2套成品并附带安装说明书(如有的话). 如需做毒性测试需要加送一套样品. | |
Turnaround time: Normal ( 12 working days). | |
所需时间: 标准( 12个工作天). |
Sample for reference 参考图片:
>Sample Report 报告样本:
展开全文
相关产品