深圳市实测通技术服务有限公司
主营产品: ROHS认证、CE认证、FCC认证、CB认证、FDA认证、UL认证、CCC认证、GS认证、MIC认证、EK认证、PSE认证、E-MARK 认证等国际安全测试认证
加拿大标准 SOR/2010-261 童床摇篮及摇床的安全测试



SOR/2010-261 Cribs, Cradles and Bassinets Regulations, 童床,摇篮及摇床的安全测试  

ClauseTest Requirement
 physical part 物理机械部分
Surface Coating (CCPSA Soluble Sb, As, Cd, Ba, Se), 表面涂层测试 ( CCPSA 溶出锑、砷、镉、钡、硒)
Surface Coating (CCPSA Total Pb, Total Hg), 表面涂层测试 ( CCPSA 总铅总汞含量)
Flammability (CAN/CGSB-4.2, No. 27.5-2008)
INFORMATION AND ADVERTISING
3GENERAL PROVISIONS
5PRESENTATION OF INFORMATION
8CRIBS, CRADLES AND BASSINETS
10CRIBS
11CRADLES
12BASSINETS
13GENERAL PROVISIONS-shearing or pinching
14surface coating 
15requirement on rock angle
16STRENGTH AND SOLIDITY OF SLATS
17bound opening
18Flammability
19test on mesh
20requirement on mattress
21entanglement hazard
22sharp point and sharp edge
23small part
24coil spring
25requirement on the openings
cribs(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is greater than 5 500 cm2.)
26requirement of the height
29 1)locking system for the movable side
2)force requirement 
3)requirement of move-upward  side  of  a  crib
4)latching  or  locking mechanism of every rotating side of a crib
5)
30latch and structural integraty requirement for folding cot
31requirement of post
32requirement of toe hold
33TEST OF MATTRESS SUPPORT
34structural integrity
cradles(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is greater than 4 000 cm2 but less than or equal to 5 500 cm2.)
35height requirement
36
37requirement of locking system
38structural integrity
39TEST OF MATTRESS SUPPORT
40strenght of the locking system(depends on clause 38)
bassinets(means a product whose primary function is to provide sleeping accommodation for a child, that includes sides to confine the occupant and that has a sleeping surface area that is less than or equal to 4 000 cm2.)
41height requirement
42static load
Remark:
Sample required: 2 sets of completed products with assembly instruction (if applicable) is recommended. 1 more set required for toxicity  test.
样品要求: 2套成品并附带安装说明书(如有的话). 如需做毒性测试需要加送一套样品.
Turnaround time: Normal ( 12 working days).
所需时间: 标准( 12个工作天).

 

Sample for reference 参考图片:

Responsive image

 >Sample Report 报告样本:

Responsive image


展开全文
拨打电话 发送询价