深圳市实测通技术服务有限公司
主营产品: ROHS认证、CE认证、FCC认证、CB认证、FDA认证、UL认证、CCC认证、GS认证、MIC认证、EK认证、PSE认证、E-MARK 认证等国际安全测试认证
英国标准 BS 6206建筑用平板安全玻璃和安全塑料冲击性能测试



  
BS 6206, 建筑用平板安全玻璃和安全塑料冲击性能测试
pecification for Impact Performance Requirements for Flat Safety Glass and Safety Plastics for Use in Building
Scope: This standard specifies performance requirements and a test method in respect of energy absorption (impact) for flat safety glass and safety plastics for use in buildings. These requirements are intended to reduce the risk of injuries caused by cutting and piercing in accidents where these materials are involved. Three classes of safety glass and safety plastic are defined.
This standard does not specify situations where safety glass and safety plastics should be used, nor does it specify requirements for their durability.
ClauseTest Requirement
 Class A
Class B
Class C
Toughened glass 
Sample required:
样品要求:
Class A: 12 pieces of glass (865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mm H).
Class B: 8 pieces of glass (865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mm H)
Class C: 4 pieces of glass (865±3mm(W)*1930±3mm(H) or 865 mm W x at least 600 mm H)
For toughened glass, one extra piece glass needed for toughening quality test
A级: 12块玻璃(865±3mm(宽)*1930±3(高)或 865 mm 宽 x 至少600 mm 高)
B级: 8块玻璃(865±3mm(宽)*1930±3(高)或 865 mm 宽 x 至少600 mm 高)
C级: 4块玻璃(865±3mm(宽)*1930±3(高)或 865 mm 宽 x 至少600 mm 高)
若为钢化玻璃,另需加送一块玻璃碎片测试
Turnaround time:
所需时间: 
Regular (7 working days)
标准(7 个工作天)
Remark:
备注:
1. The weight of the complete impactor is 45kg.
2. This standard is designed for the safety assessment of flat safety glass and safety plastics for use in buildings, however it also may be referenced to evaluate the performance of the glass used in furniture.
3. This standard requires all panels shall be marked, accordingly please require client providing the marking when the full tests are requested.


 
Sample for reference 参考图片:

Responsive image

 

">Sample Report 报告样本:

Responsive image


展开全文
相关产品
拨打电话 QQ咨询 发送询价