点击上方“电磁兼容检测”，马上关注

GB/T17626及IEC61000-4系列现行有效标准

摘要：介绍了GB/T17626系列现行有效标准，共27个标准，以及IEC61000-4系列现行有效标准，共36个标准。

IEC61000-4系列标准是国际电工委员会IEC所颁布的一个抗扰度试验方面的基础性标准，适用于各种电气与电子设备作电磁兼容性的测试，IEC61000-4系列标准实用性高、可操作性强，IEC61000-4系列标准对不同电磁环境条件下的电气与电子设备的电磁兼容性有不同的要求，应用非常之广泛。IEC61000-4系列标准对应国内标准是GB/T17626系列标准。

GB/T 17626系列现行标准

GB/T 17626.1-2006电磁兼容 试验和测量技术 抗扰度试验总论

GB/T 17626.2-2018电磁兼容 试验和测量技术 静电放电抗扰度试验

GB/T 17626.3-2016电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验

GB/T 17626.4-2018电磁兼容 试验和测量技术 电快速瞬变脉冲群抗扰度试验

GB/T 17626.5-2008电磁兼容 试验和测量技术 浪涌(冲击)抗扰度试验

GB/T 17626.6-2017电磁兼容 试验和测量技术 射频场感应的传导骚扰抗扰度

GB/T 17626.7-2017电磁兼容 试验和测量技术 供电系统及所连设备谐波、间谐波的测量和测量仪器导则

GB/T 17626.8-2006电磁兼容 试验和测量技术 工频磁场抗扰度试验

GB/T 17626.9-2011电磁兼容 试验和测量技术 脉冲磁场抗扰度试验

GB/T 17626.10-2017电磁兼容 试验和测量技术 阻尼振荡磁场抗扰度试验

GB/T 17626.11-2008电磁兼容 试验和测量技术 电压暂降、短时中断和电压变化的抗扰度试验

GB/T 17626.12-2013电磁兼容 试验和测量技术 振铃波抗扰度试验

GB/T 17626.13-2006电磁兼容 试验和测量技术 交流电源端口谐波、谐间波及电网信号的低频抗扰度试验

GB/T 17626.14-2005电磁兼容 试验和测量技术 电压波动抗扰度试验

GB/T 17626.15-2011电磁兼容 试验和测量技术 闪烁仪 功能和设计规范

GB/T 17626.16-2007电磁兼容 试验和测量技术 0Hz～150kHz共模传导骚扰抗扰度试验

GB/T 17626.17-2005电磁兼容 试验和测量技术 直流电源输入端口纹波抗扰度试验

GB/T 17626.18-2016电磁兼容 试验和测量技术 阻尼振荡波抗扰度试验

GB/T 17626.20-2014电磁兼容 试验和测量技术 横电磁波（TEM）波导中的发射和抗扰度试验

GB/T 17626.21-2014电磁兼容 试验和测量技术 混波室试验方法

GB/T 17626.22-2017电磁兼容 试验和测量技术 全电波暗室中的辐射发射和抗扰度测量

GB/T 17626.24-2012电磁兼容 试验和测量技术 HEMP传导骚扰保护装置的试验方法

GB/T 17626.27-2006电磁兼容 试验和测量技术 三相电压不平衡抗扰度试验

GB/T 17626.28-2006电磁兼容 试验和测量技术 工频频率变化抗扰度试验

GB/T 17626.29-2006电磁兼容 试验和测量技术 直流电源输入端口电压暂降、短时中断和电压变化的抗扰度试验

GB/T 17626.30-2012电磁兼容 试验和测量技术 电能质量测量方法

GB/T 17626.34-2012电磁兼容 试验和测量技术 主电源每相电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验

IEC 61000-4系列现行标准

IEC 61000-4-1:2016 - Electromagnetic compatibility (EMC) – Part 4-1: Testing and measurement techniques – Overview of the IEC 61000-4 series

IEC 61000-4-2:2008 - Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test

IEC 61000-4-3:2010 - Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-4:2012 - Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test

IEC 61000-4-5:2017 - Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test

IEC 61000-4-6:2013 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND ***SUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS

IEC 61000-4-7:2009 - Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto

IEC 61000-4-8:2009 - Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test

September 1, 2009 - IEC

IEC 61000-4-9:2016 - Electromagnetic compatibility (EMC) – Part 4-9: Testing and measurement techniques – Impulse magnetic field immunity test

IEC 61000-4-10 :2016- Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

IEC 61000-4-11:2017 - ELECTROMAGNETIC COMPATIBILITY (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests

IEC 61000-4-12 :2017- Electromagnetic compatibility (EMC) – Part 4-12: Testing and measurement techniques – Ring wave immunity test

IEC 61000-4-13:2015 - Electromagnetic compatibility (EMC) – Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

IEC 61000-4-14:2009 - Electromagnetic compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase

IEC 61000-4-15:2010 REDLINE - Electromagnetic compatibility (EMC) – Part 4-15: Testing and measurement techniques – Flickermeter – Functional and design specifications

IEC 61000-4-16:2015 - Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

IEC 61000-4-17:2009 - Electromagnetic compatibility (EMC) – Part 4-17: Testing and measurement techniques – Ripple on d.c. input power port immunity test

IEC 61000-4-18:2011 - Electromagnetic compatibility (EMC) – Part 4-18: Testing and measurement techniques – Damped oscillatory wave immunity test

IEC 61000-4-19:2014 - Electromagnetic compatibility (EMC) – Part 4-19: Testing and measurement techniques – Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

IEC 61000-4-20:2010 - Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides

IEC 61000-4-21:2011 - Electromagnetic compatibility (EMC) – Part 4-21: Testing and measurement techniques – Reverberation chamber test methods

IEC 61000-4-22:2010 - Electromagnetic compatibility (EMC) – Part 4-22: Testing and measurement techniques – Radiated emissions and immunity measurements in fully anechoic rooms (FARs)

IEC 61000-4-23:2016 - Electromagnetic Compatibility (EMC) - Part 4-23: Testing and Measurement Techniques - Test Methods for Protective Devices for HEMP and Other Radiated Disturbances

IEC 61000-4-24:2015 - Electromagnetic compatibility (EMC) – Part 4-24: Testing and measurement techniques – Test methods for protective devices for HEMP conducted disturbance

IEC 61000-4-25:2012 - Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques – HEMP immunity test methods for equipment and systems

IEC 61000-4-27:2009 - Electromagnetic compatibility (EMC) – Part 4-27: Testing and measurement techniques – Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

IEC 61000-4-28:2009 - Electromagnetic compatibility (EMC) – Part 4-28: Testing and measurement techniques – Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

IEC 61000-4-29:2000 - Electromagnetic Compatibility (EMC) - Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on d.c. Input Power Port Immunity Tests

IEC 61000-4-30:2015 - Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods

IEC 61000-4-31:2016 - Electromagnetic compatibility (EMC) – Part 4-31: Testing and measurement techniques – AC mains ports broadband conducted disturbance immunity test

IEC 61000-4-33:2005 - Electromagnetic compatibility (EMC) Part 4-33: Testing and measurement techniques Measurement methods for high-power transient parameters

IEC 61000-4-34:2009 - Electromagnetic compatibility (EMC) – Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

IEC 61000-4-36:2014 - Electromagnetic compatibility (EMC) – Part 4-36: Testing and measurement techniques – IEMI immunity test methods for equipment and systems

IEC 61000-4-37:2016 - Electromagnetic compatibility (EMC) – Part 4-37: Testing and measurement techniques – Calibration and verification protocol for harmonic emission compliance test systems

IEC 61000-4-38:2015 - Electromagnetic compatibility (EMC) – Part 4-38: Testing and measurement techniques – Test, verification and calibration protocol for voltage fluctuation and flicker compliance test systems

IEC 61000-4-39:2017 - Electromagnetic compatibility (EMC) – Part 4-39: Testing and measurement techniques – Radiated fields in close proximity – Immunity test