深圳市实测通技术服务有限公司
主营产品: ROHS认证、CE认证、FCC认证、CB认证、FDA认证、UL认证、CCC认证、GS认证、MIC认证、EK认证、PSE认证、E-MARK 认证等国际安全测试认证
美国FCC*新公告:FCC Part15设备的天线信息报告要求


图片


图片

FCC Part15设备的天线信息报告要求

美国时间2022.8.25以后申请的FCC ID案件(此日期之前发证的不影响)

1. Part 15部分应用与设备类别DSC, DXX, DCD, 8CC等,没有EIRP限制。
此类产品包含 无线充电设备,部分无线麦克风,NFC,  27、40、315、433、915MHz遥控器,2.4GHz无线鼠标,5.8GHz传感器,24GHz雷达波传感器等
因测试过程中,天线增益在发射场强测量中已经考虑再内;故递交申请只需要天线信息: 天线照片/或图纸,包括天线尺寸。

2. Part 15部分应用 licence设备与设备类别DTS, DSS, NII, 6ID等,要求天线增益符合EIRP限制:
此类产品包含 蓝牙设备,WIFI设备,2/3/4/5G通讯设备等
递交申请中提供的天线数据表或天线增益测量报告。

天线报告至少报告以下信息:
1.要有天线尺寸图
2.要有制造商信息
3.要有2D/3D Peak Gain 测试图
4.要有Peak Gain 测试数据表,并和2D/3D Peak Gain 测试图结果一致
5.测量程序
6.测试设备
7.测试设置
8.签名
9.设施/测试地点描述等


原文如下:

Any applications granted after August 25, 2022 that do not contain the proper antenna information will be dismissed.

 This email is to bring to your attention that while the FCC has been advising test labs and TCBs to make sure part 15 applications includes antenna gain data sheets and/or test reports, it is evident by recent audits that this information is being omitted. We are still finding reports that state, "antenna gain information is declared by the manufacturer", with no other supporting information.  As we have re-iterated during the last TCB workshop, this statement will not suffice.  All part 15 applications will need to show how the antenna gain was derived either from a manufacturer data sheet or a measurement.  Where the gain of the antenna is inherently accounted for as a result of the measurement, such as field strength measurements on a part 15.249 or 15.231 device, so the gain does not necessarily need to be verified.  However, enough information regarding the construction of the antenna shall be provided.  Such information maybe photographs, length of wire antenna etc. The antenna gain information shall be made public (not confidential).  Any proprietary information such as construction maybe stripped from the gain information report and held confidential. The main antenna information we require is the maximum gain of the antenna for the band of operation. This information must be provided as a data sheet or a measurement report.

-END-


展开全文
相关产品
拨打电话 发送询价